Carbide Engraving Cutter, .060in, 1/8in Shank, W/Knob (ZEC-A2150)
Part #: C2-125-060K
About Engraver Carbide Cutters Bits
Cutter bits are use on softer material like
wood, plastic, and acrylic.
always use with the spindle on.
Roland has sizes ranging from 010k to .171k.
Size of the bit is depended on what letter size you are trying to
For example when you are
engraving 1/8 inch letter you would normally use .010k or 015k tip.
For 1/4 inch tall letter you would use 030k
If you are doing larger letters
like 1/2 in you would use .060k or .090k.
For one inch letter or larger it
recommend to use the .125k or .171k.
The cutter bits come in two different
shank size 1/8 and 11/64 .
cutters are use with the PNC 2300, EGX-20. EGX-30, EGX-350. The 11/64 shank are only used with the
EGX-350, EGX-400 and EGX-600