C2-171-171K Carbide Tip Engr Cutter, .171in 11/64in Shank, W/Knob
Part #: C2-171-171K
About Engraver Carbide Cutters Bits
Cutter bits are use on softer material like
wood, plastic, and acrylic.
They are
always use with the spindle on.
Roland has sizes ranging from 010k to .171k.
Size of the bit is depended on what letter size you are trying to
engraver.
For example, when you are
engraving 1/8-inch letter you would normally use .010k or 015k tip.
For 1/4-inch-tall letter you would use 030k
tip.
If you are doing larger letters
like 1/2 in you would use .060k or .090k.
For one inch letter or larger it is recommended to use the .125k or .171k.
The cutter bits come in two different
shank size 1/8 and 11/64.
1/8 shank
cutters are use with the PNC 2300, EGX-20. EGX-30, EGX-350.
The 11/64 shank are only used with the
EGX-350, EGX-400 and EGX-600
